{"title":"Timers","description":"","products":[{"product_id":"lut-ma-t51mn","title":"Maestro Countdown Timer, Multi-location\/single-pole, neutral required, 120V\/600W\/VA (5A)","description":"\u003cdiv id=\"desc-MA-T51MN-AL\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Lutron Maestro Timer Switch for Fans and Lights is rated to work with up to 150W of LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV, or 3A general purpose fans. The Maestro Timer Switch requires a neutral wire making it suitable for DC and high efficiency exhaust fans. The Maestro Timer Switch is compatible with 3-way\/multi-location switching applications; Lutron Accessory switches are required (MA-AS\/MSC-AS). Use up to 9 Lutron Accessory switches with one Lutron Maestro Timer Switch; existing 3-way switches are not compatible. The Maestro Timer switch completes any project and matches the Maestro aesthetic for areas that don’t require a Maestro dimmer or sensor. Save energy by using the Maestro Countdown Timer in closets, attics, bathrooms, and other low-traffic areas to ensure a light or fan is never left on for a long time. Use the large tap switch to turn the timer on, or double tap for always on; use the raise\/lower buttons on the side to adjust to the desired time-out option ranging from 5-60 minutes. Softly lit orange lights indicate the time remaining before turn-off. Top green LED indicator light labeled ON, has no time limit. The bottom LED blinks rapidly to indicate one minute of time remaining. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFamily\/Collection: Maestro\u003c\/li\u003e\n\u003cli\u003eRated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general-purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eIncludes (1) Maestro Countdown Timer Switch with Neutral; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 150W LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV or 3A general purpose fans\u003c\/li\u003e\n\u003cli\u003eNeutral required; 120V\u003c\/li\u003e\n\u003cli\u003e5W\/.05A Minimum Load, Suitable For Dc And High Efficiency Exhaust Fans\u003c\/li\u003e\n\u003cli\u003eTap once to start timer or double tap for always on; use raise\/lower buttons to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minutes)\u003c\/li\u003e\n\u003cli\u003eAccessory switch (MA-AS\/MSC-AS) required for 3-way\/multi-location applications; traditional 3-way switches will not work with this device\u003c\/li\u003e\n\u003cli\u003eUse up to 9 accessory switches (MA-AS\/MSC-AS) with one Lutron Maestro 8A Timer Switch\u003c\/li\u003e\n\u003cli\u003eOrange LEDs indicate timer duration or remaining time in minutes; Bottom LED blinks rapidly to indicate one minute of time remaining\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmperage Rating: 5\u003c\/li\u003e\n\u003cli\u003eApplication: Lighting Control\u003c\/li\u003e\n\u003cli\u003eBrand Name: Lutron\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminal\u003c\/li\u003e\n\u003cli\u003eContact Configuration: N-O\u003c\/li\u003e\n\u003cli\u003eContact Rating: 5\u003c\/li\u003e\n\u003cli\u003eInsulation: Plastic\u003c\/li\u003e\n\u003cli\u003eMounting: Wallbox\u003c\/li\u003e\n\u003cli\u003eNumber Of Poles: 1\u003c\/li\u003e\n\u003cli\u003eSize: 4.69 x 2.94\u003c\/li\u003e\n\u003cli\u003eSpecial Features: Rated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eStandard: UL, cUL, IEC, ANSI\/IEEE\u003c\/li\u003e\n\u003cli\u003eSub Brand: Maestro\u003c\/li\u003e\n\u003cli\u003eTiming Range: 5 - 60 min\u003c\/li\u003e\n\u003cli\u003eType: Countdown timer control switch, multi-location\/single-pole\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 120\u003c\/li\u003e\n\u003cli\u003eWattage: 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/368-4493_Page_18.pdf\" target=\"_blank\"\u003eTechnical Document\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/03092903B.pdf\" target=\"_blank\"\u003eInstallation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/3691243_ENG.pdf\" target=\"_blank\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\"\u003eWarranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003cdiv id=\"desc-MA-T51MN-BI\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Lutron Maestro Timer Switch for Fans and Lights is rated to work with up to 150W of LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV, or 3A general purpose fans. The Maestro Timer Switch requires a neutral wire making it suitable for DC and high efficiency exhaust fans. The Maestro Timer Switch is compatible with 3-way\/multi-location switching applications; Lutron Accessory switches are required (MA-AS\/MSC-AS). Use up to 9 Lutron Accessory switches with one Lutron Maestro Timer Switch; existing 3-way switches are not compatible. The Maestro Timer switch completes any project and matches the Maestro aesthetic for areas that don’t require a Maestro dimmer or sensor. Save energy by using the Maestro Countdown Timer in closets, attics, bathrooms, and other low-traffic areas to ensure a light or fan is never left on for a long time. Use the large tap switch to turn the timer on, or double tap for always on; use the raise\/lower buttons on the side to adjust to the desired time-out option ranging from 5-60 minutes. Softly lit orange lights indicate the time remaining before turn-off. Top green LED indicator light labeled ON, has no time limit. The bottom LED blinks rapidly to indicate one minute of time remaining. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFamily\/Collection: Maestro\u003c\/li\u003e\n\u003cli\u003eRated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general-purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eIncludes (1) Maestro Countdown Timer Switch with Neutral; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 150W LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV or 3A general purpose fans\u003c\/li\u003e\n\u003cli\u003eNeutral required; 120V\u003c\/li\u003e\n\u003cli\u003e5W\/.05A Minimum Load, Suitable For Dc And High Efficiency Exhaust Fans\u003c\/li\u003e\n\u003cli\u003eTap once to start timer or double tap for always on; use raise\/lower buttons to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minutes)\u003c\/li\u003e\n\u003cli\u003eAccessory switch (MA-AS\/MSC-AS) required for 3-way\/multi-location applications; traditional 3-way switches will not work with this device\u003c\/li\u003e\n\u003cli\u003eUse up to 9 accessory switches (MA-AS\/MSC-AS) with one Lutron Maestro 8A Timer Switch\u003c\/li\u003e\n\u003cli\u003eOrange LEDs indicate timer duration or remaining time in minutes; Bottom LED blinks rapidly to indicate one minute of time remaining\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmperage Rating: 5\u003c\/li\u003e\n\u003cli\u003eApplication: Lighting Control\u003c\/li\u003e\n\u003cli\u003eBrand Name: Lutron\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminal\u003c\/li\u003e\n\u003cli\u003eContact Configuration: N-O\u003c\/li\u003e\n\u003cli\u003eContact Rating: 5\u003c\/li\u003e\n\u003cli\u003eInsulation: Plastic\u003c\/li\u003e\n\u003cli\u003eMounting: Wallbox\u003c\/li\u003e\n\u003cli\u003eNumber Of Poles: 1\u003c\/li\u003e\n\u003cli\u003eSize: 4.69 x 2.94\u003c\/li\u003e\n\u003cli\u003eSpecial Features: Rated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eStandard: UL, cUL, IEC, ANSI\/IEEE\u003c\/li\u003e\n\u003cli\u003eSub Brand: Maestro\u003c\/li\u003e\n\u003cli\u003eTiming Range: 5 - 60 min\u003c\/li\u003e\n\u003cli\u003eType: Countdown timer control switch, multi-location\/single-pole\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 120\u003c\/li\u003e\n\u003cli\u003eWattage: 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/368-4493_Page_18.pdf\" target=\"_blank\"\u003eTechnical Document\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/03092903B.pdf\" target=\"_blank\"\u003eInstallation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/3691243_ENG.pdf\" target=\"_blank\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\"\u003eWarranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003cdiv id=\"desc-MA-T51MN-BL\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Lutron Maestro Timer Switch for Fans and Lights is rated to work with up to 150W of LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV, or 3A general purpose fans. The Maestro Timer Switch requires a neutral wire making it suitable for DC and high efficiency exhaust fans. The Maestro Timer Switch is compatible with 3-way\/multi-location switching applications; Lutron Accessory switches are required (MA-AS\/MSC-AS). Use up to 9 Lutron Accessory switches with one Lutron Maestro Timer Switch; existing 3-way switches are not compatible. The Maestro Timer switch completes any project and matches the Maestro aesthetic for areas that don’t require a Maestro dimmer or sensor. Save energy by using the Maestro Countdown Timer in closets, attics, bathrooms, and other low-traffic areas to ensure a light or fan is never left on for a long time. Use the large tap switch to turn the timer on, or double tap for always on; use the raise\/lower buttons on the side to adjust to the desired time-out option ranging from 5-60 minutes. Softly lit orange lights indicate the time remaining before turn-off. Top green LED indicator light labeled ON, has no time limit. The bottom LED blinks rapidly to indicate one minute of time remaining. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFamily\/Collection: Maestro\u003c\/li\u003e\n\u003cli\u003eRated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general-purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eIncludes (1) Maestro Countdown Timer Switch with Neutral; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 150W LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV or 3A general purpose fans\u003c\/li\u003e\n\u003cli\u003eNeutral required; 120V\u003c\/li\u003e\n\u003cli\u003e5W\/.05A Minimum Load, Suitable For Dc And High Efficiency Exhaust Fans\u003c\/li\u003e\n\u003cli\u003eTap once to start timer or double tap for always on; use raise\/lower buttons to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minutes)\u003c\/li\u003e\n\u003cli\u003eAccessory switch (MA-AS\/MSC-AS) required for 3-way\/multi-location applications; traditional 3-way switches will not work with this device\u003c\/li\u003e\n\u003cli\u003eUse up to 9 accessory switches (MA-AS\/MSC-AS) with one Lutron Maestro 8A Timer Switch\u003c\/li\u003e\n\u003cli\u003eOrange LEDs indicate timer duration or remaining time in minutes; Bottom LED blinks rapidly to indicate one minute of time remaining\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmperage Rating: 5\u003c\/li\u003e\n\u003cli\u003eApplication: Lighting Control\u003c\/li\u003e\n\u003cli\u003eBrand Name: Lutron\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminal\u003c\/li\u003e\n\u003cli\u003eContact Configuration: N-O\u003c\/li\u003e\n\u003cli\u003eContact Rating: 5\u003c\/li\u003e\n\u003cli\u003eInsulation: Plastic\u003c\/li\u003e\n\u003cli\u003eMounting: Wallbox\u003c\/li\u003e\n\u003cli\u003eNumber Of Poles: 1\u003c\/li\u003e\n\u003cli\u003eSize: 4.69 x 2.94\u003c\/li\u003e\n\u003cli\u003eSpecial Features: Rated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eStandard: UL, cUL, IEC, ANSI\/IEEE\u003c\/li\u003e\n\u003cli\u003eSub Brand: Maestro\u003c\/li\u003e\n\u003cli\u003eTiming Range: 5 - 60 min\u003c\/li\u003e\n\u003cli\u003eType: Countdown timer control switch, multi-location\/single-pole\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 120\u003c\/li\u003e\n\u003cli\u003eWattage: 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/368-4493_Page_18.pdf\" target=\"_blank\"\u003eTechnical Document\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/03092903B.pdf\" target=\"_blank\"\u003eInstallation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/3691243_ENG.pdf\" target=\"_blank\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\"\u003eWarranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003cdiv id=\"desc-MA-T51MN-BR\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Lutron Maestro Timer Switch for Fans and Lights is rated to work with up to 150W of LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV, or 3A general purpose fans. The Maestro Timer Switch requires a neutral wire making it suitable for DC and high efficiency exhaust fans. The Maestro Timer Switch is compatible with 3-way\/multi-location switching applications; Lutron Accessory switches are required (MA-AS\/MSC-AS). Use up to 9 Lutron Accessory switches with one Lutron Maestro Timer Switch; existing 3-way switches are not compatible. The Maestro Timer switch completes any project and matches the Maestro aesthetic for areas that don’t require a Maestro dimmer or sensor. Save energy by using the Maestro Countdown Timer in closets, attics, bathrooms, and other low-traffic areas to ensure a light or fan is never left on for a long time. Use the large tap switch to turn the timer on, or double tap for always on; use the raise\/lower buttons on the side to adjust to the desired time-out option ranging from 5-60 minutes. Softly lit orange lights indicate the time remaining before turn-off. Top green LED indicator light labeled ON, has no time limit. The bottom LED blinks rapidly to indicate one minute of time remaining. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFamily\/Collection: Maestro\u003c\/li\u003e\n\u003cli\u003eRated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general-purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eIncludes (1) Maestro Countdown Timer Switch with Neutral; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 150W LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV or 3A general purpose fans\u003c\/li\u003e\n\u003cli\u003eNeutral required; 120V\u003c\/li\u003e\n\u003cli\u003e5W\/.05A Minimum Load, Suitable For Dc And High Efficiency Exhaust Fans\u003c\/li\u003e\n\u003cli\u003eTap once to start timer or double tap for always on; use raise\/lower buttons to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minutes)\u003c\/li\u003e\n\u003cli\u003eAccessory switch (MA-AS\/MSC-AS) required for 3-way\/multi-location applications; traditional 3-way switches will not work with this device\u003c\/li\u003e\n\u003cli\u003eUse up to 9 accessory switches (MA-AS\/MSC-AS) with one Lutron Maestro 8A Timer Switch\u003c\/li\u003e\n\u003cli\u003eOrange LEDs indicate timer duration or remaining time in minutes; Bottom LED blinks rapidly to indicate one minute of time remaining\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmperage Rating: 5\u003c\/li\u003e\n\u003cli\u003eApplication: Lighting Control\u003c\/li\u003e\n\u003cli\u003eBrand Name: Lutron\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminal\u003c\/li\u003e\n\u003cli\u003eContact Configuration: N-O\u003c\/li\u003e\n\u003cli\u003eContact Rating: 5\u003c\/li\u003e\n\u003cli\u003eInsulation: Plastic\u003c\/li\u003e\n\u003cli\u003eMounting: Wallbox\u003c\/li\u003e\n\u003cli\u003eNumber Of Poles: 1\u003c\/li\u003e\n\u003cli\u003eSize: 4.69 x 2.94\u003c\/li\u003e\n\u003cli\u003eSpecial Features: Rated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eStandard: UL, cUL, IEC, ANSI\/IEEE\u003c\/li\u003e\n\u003cli\u003eSub Brand: Maestro\u003c\/li\u003e\n\u003cli\u003eTiming Range: 5 - 60 min\u003c\/li\u003e\n\u003cli\u003eType: Countdown timer control switch, multi-location\/single-pole\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 120\u003c\/li\u003e\n\u003cli\u003eWattage: 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/368-4493_Page_18.pdf\" target=\"_blank\"\u003eTechnical Document\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/03092903B.pdf\" target=\"_blank\"\u003eInstallation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/3691243_ENG.pdf\" target=\"_blank\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\"\u003eWarranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003cdiv id=\"desc-MA-T51MN-GR\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Lutron Maestro Timer Switch for Fans and Lights is rated to work with up to 150W of LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV, or 3A general purpose fans. The Maestro Timer Switch requires a neutral wire making it suitable for DC and high efficiency exhaust fans. The Maestro Timer Switch is compatible with 3-way\/multi-location switching applications; Lutron Accessory switches are required (MA-AS\/MSC-AS). Use up to 9 Lutron Accessory switches with one Lutron Maestro Timer Switch; existing 3-way switches are not compatible. The Maestro Timer switch completes any project and matches the Maestro aesthetic for areas that don’t require a Maestro dimmer or sensor. Save energy by using the Maestro Countdown Timer in closets, attics, bathrooms, and other low-traffic areas to ensure a light or fan is never left on for a long time. Use the large tap switch to turn the timer on, or double tap for always on; use the raise\/lower buttons on the side to adjust to the desired time-out option ranging from 5-60 minutes. Softly lit orange lights indicate the time remaining before turn-off. Top green LED indicator light labeled ON, has no time limit. The bottom LED blinks rapidly to indicate one minute of time remaining. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFamily\/Collection: Maestro\u003c\/li\u003e\n\u003cli\u003eRated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general-purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eIncludes (1) Maestro Countdown Timer Switch with Neutral; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 150W LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV or 3A general purpose fans\u003c\/li\u003e\n\u003cli\u003eNeutral required; 120V\u003c\/li\u003e\n\u003cli\u003e5W\/.05A Minimum Load, Suitable For Dc And High Efficiency Exhaust Fans\u003c\/li\u003e\n\u003cli\u003eTap once to start timer or double tap for always on; use raise\/lower buttons to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minutes)\u003c\/li\u003e\n\u003cli\u003eAccessory switch (MA-AS\/MSC-AS) required for 3-way\/multi-location applications; traditional 3-way switches will not work with this device\u003c\/li\u003e\n\u003cli\u003eUse up to 9 accessory switches (MA-AS\/MSC-AS) with one Lutron Maestro 8A Timer Switch\u003c\/li\u003e\n\u003cli\u003eOrange LEDs indicate timer duration or remaining time in minutes; Bottom LED blinks rapidly to indicate one minute of time remaining\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmperage Rating: 5\u003c\/li\u003e\n\u003cli\u003eApplication: Lighting Control\u003c\/li\u003e\n\u003cli\u003eBrand Name: Lutron\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminal\u003c\/li\u003e\n\u003cli\u003eContact Configuration: N-O\u003c\/li\u003e\n\u003cli\u003eContact Rating: 5\u003c\/li\u003e\n\u003cli\u003eInsulation: Plastic\u003c\/li\u003e\n\u003cli\u003eMounting: Wallbox\u003c\/li\u003e\n\u003cli\u003eNumber Of Poles: 1\u003c\/li\u003e\n\u003cli\u003eSize: 4.69 x 2.94\u003c\/li\u003e\n\u003cli\u003eSpecial Features: Rated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eStandard: UL, cUL, IEC, ANSI\/IEEE\u003c\/li\u003e\n\u003cli\u003eSub Brand: Maestro\u003c\/li\u003e\n\u003cli\u003eTiming Range: 5 - 60 min\u003c\/li\u003e\n\u003cli\u003eType: Countdown timer control switch, multi-location\/single-pole\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 120\u003c\/li\u003e\n\u003cli\u003eWattage: 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/368-4493_Page_18.pdf\" target=\"_blank\"\u003eTechnical Document\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/03092903B.pdf\" target=\"_blank\"\u003eInstallation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/3691243_ENG.pdf\" target=\"_blank\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\"\u003eWarranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003cdiv id=\"desc-MA-T51MN-HT\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Lutron Maestro Timer Switch for Fans and Lights is rated to work with up to 150W of LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV, or 3A general purpose fans. The Maestro Timer Switch requires a neutral wire making it suitable for DC and high efficiency exhaust fans. The Maestro Timer Switch is compatible with 3-way\/multi-location switching applications; Lutron Accessory switches are required (MA-AS\/MSC-AS). Use up to 9 Lutron Accessory switches with one Lutron Maestro Timer Switch; existing 3-way switches are not compatible. The Maestro Timer switch completes any project and matches the Maestro aesthetic for areas that don’t require a Maestro dimmer or sensor. Save energy by using the Maestro Countdown Timer in closets, attics, bathrooms, and other low-traffic areas to ensure a light or fan is never left on for a long time. Use the large tap switch to turn the timer on, or double tap for always on; use the raise\/lower buttons on the side to adjust to the desired time-out option ranging from 5-60 minutes. Softly lit orange lights indicate the time remaining before turn-off. Top green LED indicator light labeled ON, has no time limit. The bottom LED blinks rapidly to indicate one minute of time remaining. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFamily\/Collection: Maestro\u003c\/li\u003e\n\u003cli\u003eRated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general-purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eIncludes (1) Maestro Countdown Timer Switch with Neutral; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 150W LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV or 3A general purpose fans\u003c\/li\u003e\n\u003cli\u003eNeutral required; 120V\u003c\/li\u003e\n\u003cli\u003e5W\/.05A Minimum Load, Suitable For Dc And High Efficiency Exhaust Fans\u003c\/li\u003e\n\u003cli\u003eTap once to start timer or double tap for always on; use raise\/lower buttons to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minutes)\u003c\/li\u003e\n\u003cli\u003eAccessory switch (MA-AS\/MSC-AS) required for 3-way\/multi-location applications; traditional 3-way switches will not work with this device\u003c\/li\u003e\n\u003cli\u003eUse up to 9 accessory switches (MA-AS\/MSC-AS) with one Lutron Maestro 8A Timer Switch\u003c\/li\u003e\n\u003cli\u003eOrange LEDs indicate timer duration or remaining time in minutes; Bottom LED blinks rapidly to indicate one minute of time remaining\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmperage Rating: 5\u003c\/li\u003e\n\u003cli\u003eApplication: Lighting Control\u003c\/li\u003e\n\u003cli\u003eBrand Name: Lutron\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminal\u003c\/li\u003e\n\u003cli\u003eContact Configuration: N-O\u003c\/li\u003e\n\u003cli\u003eContact Rating: 5\u003c\/li\u003e\n\u003cli\u003eInsulation: Plastic\u003c\/li\u003e\n\u003cli\u003eMounting: Wallbox\u003c\/li\u003e\n\u003cli\u003eNumber Of Poles: 1\u003c\/li\u003e\n\u003cli\u003eSize: 4.69 x 2.94\u003c\/li\u003e\n\u003cli\u003eSpecial Features: Rated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eStandard: UL, cUL, IEC, ANSI\/IEEE\u003c\/li\u003e\n\u003cli\u003eSub Brand: Maestro\u003c\/li\u003e\n\u003cli\u003eTiming Range: 5 - 60 min\u003c\/li\u003e\n\u003cli\u003eType: Countdown timer control switch, multi-location\/single-pole\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 120\u003c\/li\u003e\n\u003cli\u003eWattage: 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/368-4493_Page_18.pdf\" target=\"_blank\"\u003eTechnical Document\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/03092903B.pdf\" target=\"_blank\"\u003eInstallation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/3691243_ENG.pdf\" target=\"_blank\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\"\u003eWarranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003cdiv id=\"desc-MA-T51MN-IV\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Lutron Maestro Timer Switch for Fans and Lights is rated to work with up to 150W of LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV, or 3A general purpose fans. The Maestro Timer Switch requires a neutral wire making it suitable for DC and high efficiency exhaust fans. The Maestro Timer Switch is compatible with 3-way\/multi-location switching applications; Lutron Accessory switches are required (MA-AS\/MSC-AS). Use up to 9 Lutron Accessory switches with one Lutron Maestro Timer Switch; existing 3-way switches are not compatible. The Maestro Timer switch completes any project and matches the Maestro aesthetic for areas that don’t require a Maestro dimmer or sensor. Save energy by using the Maestro Countdown Timer in closets, attics, bathrooms, and other low-traffic areas to ensure a light or fan is never left on for a long time. Use the large tap switch to turn the timer on, or double tap for always on; use the raise\/lower buttons on the side to adjust to the desired time-out option ranging from 5-60 minutes. Softly lit orange lights indicate the time remaining before turn-off. Top green LED indicator light labeled ON, has no time limit. The bottom LED blinks rapidly to indicate one minute of time remaining. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFamily\/Collection: Maestro\u003c\/li\u003e\n\u003cli\u003eRated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general-purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eIncludes (1) Maestro Countdown Timer Switch with Neutral; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 150W LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV or 3A general purpose fans\u003c\/li\u003e\n\u003cli\u003eNeutral required; 120V\u003c\/li\u003e\n\u003cli\u003e5W\/.05A Minimum Load, Suitable For Dc And High Efficiency Exhaust Fans\u003c\/li\u003e\n\u003cli\u003eTap once to start timer or double tap for always on; use raise\/lower buttons to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minutes)\u003c\/li\u003e\n\u003cli\u003eAccessory switch (MA-AS\/MSC-AS) required for 3-way\/multi-location applications; traditional 3-way switches will not work with this device\u003c\/li\u003e\n\u003cli\u003eUse up to 9 accessory switches (MA-AS\/MSC-AS) with one Lutron Maestro 8A Timer Switch\u003c\/li\u003e\n\u003cli\u003eOrange LEDs indicate timer duration or remaining time in minutes; Bottom LED blinks rapidly to indicate one minute of time remaining\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmperage Rating: 5\u003c\/li\u003e\n\u003cli\u003eApplication: Lighting Control\u003c\/li\u003e\n\u003cli\u003eBrand Name: Lutron\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminal\u003c\/li\u003e\n\u003cli\u003eContact Configuration: N-O\u003c\/li\u003e\n\u003cli\u003eContact Rating: 5\u003c\/li\u003e\n\u003cli\u003eInsulation: Plastic\u003c\/li\u003e\n\u003cli\u003eMounting: Wallbox\u003c\/li\u003e\n\u003cli\u003eNumber Of Poles: 1\u003c\/li\u003e\n\u003cli\u003eSize: 4.69 x 2.94\u003c\/li\u003e\n\u003cli\u003eSpecial Features: Rated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eStandard: UL, cUL, IEC, ANSI\/IEEE\u003c\/li\u003e\n\u003cli\u003eSub Brand: Maestro\u003c\/li\u003e\n\u003cli\u003eTiming Range: 5 - 60 min\u003c\/li\u003e\n\u003cli\u003eType: Countdown timer control switch, multi-location\/single-pole\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 120\u003c\/li\u003e\n\u003cli\u003eWattage: 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/368-4493_Page_18.pdf\" target=\"_blank\"\u003eTechnical Document\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/03092903B.pdf\" target=\"_blank\"\u003eInstallation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/3691243_ENG.pdf\" target=\"_blank\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\"\u003eWarranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003cdiv id=\"desc-MA-T51MN-LA\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Lutron Maestro Timer Switch for Fans and Lights is rated to work with up to 150W of LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV, or 3A general purpose fans. The Maestro Timer Switch requires a neutral wire making it suitable for DC and high efficiency exhaust fans. The Maestro Timer Switch is compatible with 3-way\/multi-location switching applications; Lutron Accessory switches are required (MA-AS\/MSC-AS). Use up to 9 Lutron Accessory switches with one Lutron Maestro Timer Switch; existing 3-way switches are not compatible. The Maestro Timer switch completes any project and matches the Maestro aesthetic for areas that don’t require a Maestro dimmer or sensor. Save energy by using the Maestro Countdown Timer in closets, attics, bathrooms, and other low-traffic areas to ensure a light or fan is never left on for a long time. Use the large tap switch to turn the timer on, or double tap for always on; use the raise\/lower buttons on the side to adjust to the desired time-out option ranging from 5-60 minutes. Softly lit orange lights indicate the time remaining before turn-off. Top green LED indicator light labeled ON, has no time limit. The bottom LED blinks rapidly to indicate one minute of time remaining. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFamily\/Collection: Maestro\u003c\/li\u003e\n\u003cli\u003eRated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general-purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eIncludes (1) Maestro Countdown Timer Switch with Neutral; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 150W LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV or 3A general purpose fans\u003c\/li\u003e\n\u003cli\u003eNeutral required; 120V\u003c\/li\u003e\n\u003cli\u003e5W\/.05A Minimum Load, Suitable For Dc And High Efficiency Exhaust Fans\u003c\/li\u003e\n\u003cli\u003eTap once to start timer or double tap for always on; use raise\/lower buttons to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minutes)\u003c\/li\u003e\n\u003cli\u003eAccessory switch (MA-AS\/MSC-AS) required for 3-way\/multi-location applications; traditional 3-way switches will not work with this device\u003c\/li\u003e\n\u003cli\u003eUse up to 9 accessory switches (MA-AS\/MSC-AS) with one Lutron Maestro 8A Timer Switch\u003c\/li\u003e\n\u003cli\u003eOrange LEDs indicate timer duration or remaining time in minutes; Bottom LED blinks rapidly to indicate one minute of time remaining\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmperage Rating: 5\u003c\/li\u003e\n\u003cli\u003eApplication: Lighting Control\u003c\/li\u003e\n\u003cli\u003eBrand Name: Lutron\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminal\u003c\/li\u003e\n\u003cli\u003eContact Configuration: N-O\u003c\/li\u003e\n\u003cli\u003eContact Rating: 5\u003c\/li\u003e\n\u003cli\u003eInsulation: Plastic\u003c\/li\u003e\n\u003cli\u003eMounting: Wallbox\u003c\/li\u003e\n\u003cli\u003eNumber Of Poles: 1\u003c\/li\u003e\n\u003cli\u003eSize: 4.69 x 2.94\u003c\/li\u003e\n\u003cli\u003eSpecial Features: Rated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eStandard: UL, cUL, IEC, ANSI\/IEEE\u003c\/li\u003e\n\u003cli\u003eSub Brand: Maestro\u003c\/li\u003e\n\u003cli\u003eTiming Range: 5 - 60 min\u003c\/li\u003e\n\u003cli\u003eType: Countdown timer control switch, multi-location\/single-pole\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 120\u003c\/li\u003e\n\u003cli\u003eWattage: 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/368-4493_Page_18.pdf\" target=\"_blank\"\u003eTechnical Document\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/03092903B.pdf\" target=\"_blank\"\u003eInstallation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/3691243_ENG.pdf\" target=\"_blank\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\"\u003eWarranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003cdiv id=\"desc-MA-T51MN-MN\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Lutron Maestro Timer Switch for Fans and Lights is rated to work with up to 150W of LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV, or 3A general purpose fans. The Maestro Timer Switch requires a neutral wire making it suitable for DC and high efficiency exhaust fans. The Maestro Timer Switch is compatible with 3-way\/multi-location switching applications; Lutron Accessory switches are required (MA-AS\/MSC-AS). Use up to 9 Lutron Accessory switches with one Lutron Maestro Timer Switch; existing 3-way switches are not compatible. The Maestro Timer switch completes any project and matches the Maestro aesthetic for areas that don’t require a Maestro dimmer or sensor. Save energy by using the Maestro Countdown Timer in closets, attics, bathrooms, and other low-traffic areas to ensure a light or fan is never left on for a long time. Use the large tap switch to turn the timer on, or double tap for always on; use the raise\/lower buttons on the side to adjust to the desired time-out option ranging from 5-60 minutes. Softly lit orange lights indicate the time remaining before turn-off. Top green LED indicator light labeled ON, has no time limit. The bottom LED blinks rapidly to indicate one minute of time remaining. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFamily\/Collection: Maestro\u003c\/li\u003e\n\u003cli\u003eRated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general-purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eIncludes (1) Maestro Countdown Timer Switch with Neutral; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 150W LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV or 3A general purpose fans\u003c\/li\u003e\n\u003cli\u003eNeutral required; 120V\u003c\/li\u003e\n\u003cli\u003e5W\/.05A Minimum Load, Suitable For Dc And High Efficiency Exhaust Fans\u003c\/li\u003e\n\u003cli\u003eTap once to start timer or double tap for always on; use raise\/lower buttons to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minutes)\u003c\/li\u003e\n\u003cli\u003eAccessory switch (MA-AS\/MSC-AS) required for 3-way\/multi-location applications; traditional 3-way switches will not work with this device\u003c\/li\u003e\n\u003cli\u003eUse up to 9 accessory switches (MA-AS\/MSC-AS) with one Lutron Maestro 8A Timer Switch\u003c\/li\u003e\n\u003cli\u003eOrange LEDs indicate timer duration or remaining time in minutes; Bottom LED blinks rapidly to indicate one minute of time remaining\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmperage Rating: 5\u003c\/li\u003e\n\u003cli\u003eApplication: Lighting Control\u003c\/li\u003e\n\u003cli\u003eBrand Name: Lutron\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminal\u003c\/li\u003e\n\u003cli\u003eContact Configuration: N-O\u003c\/li\u003e\n\u003cli\u003eContact Rating: 5\u003c\/li\u003e\n\u003cli\u003eInsulation: Plastic\u003c\/li\u003e\n\u003cli\u003eMounting: Wallbox\u003c\/li\u003e\n\u003cli\u003eNumber Of Poles: 1\u003c\/li\u003e\n\u003cli\u003eSize: 4.69 x 2.94\u003c\/li\u003e\n\u003cli\u003eSpecial Features: Rated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eStandard: UL, cUL, IEC, ANSI\/IEEE\u003c\/li\u003e\n\u003cli\u003eSub Brand: Maestro\u003c\/li\u003e\n\u003cli\u003eTiming Range: 5 - 60 min\u003c\/li\u003e\n\u003cli\u003eType: Countdown timer control switch, multi-location\/single-pole\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 120\u003c\/li\u003e\n\u003cli\u003eWattage: 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/368-4493_Page_18.pdf\" target=\"_blank\"\u003eTechnical Document\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/03092903B.pdf\" target=\"_blank\"\u003eInstallation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/3691243_ENG.pdf\" target=\"_blank\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\"\u003eWarranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003cdiv id=\"desc-MA-T51MN-PD\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Lutron Maestro Timer Switch for Fans and Lights is rated to work with up to 150W of LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV, or 3A general purpose fans. The Maestro Timer Switch requires a neutral wire making it suitable for DC and high efficiency exhaust fans. The Maestro Timer Switch is compatible with 3-way\/multi-location switching applications; Lutron Accessory switches are required (MA-AS\/MSC-AS). Use up to 9 Lutron Accessory switches with one Lutron Maestro Timer Switch; existing 3-way switches are not compatible. The Maestro Timer switch completes any project and matches the Maestro aesthetic for areas that don’t require a Maestro dimmer or sensor. Save energy by using the Maestro Countdown Timer in closets, attics, bathrooms, and other low-traffic areas to ensure a light or fan is never left on for a long time. Use the large tap switch to turn the timer on, or double tap for always on; use the raise\/lower buttons on the side to adjust to the desired time-out option ranging from 5-60 minutes. Softly lit orange lights indicate the time remaining before turn-off. Top green LED indicator light labeled ON, has no time limit. The bottom LED blinks rapidly to indicate one minute of time remaining. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFamily\/Collection: Maestro\u003c\/li\u003e\n\u003cli\u003eRated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general-purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eIncludes (1) Maestro Countdown Timer Switch with Neutral; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 150W LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV or 3A general purpose fans\u003c\/li\u003e\n\u003cli\u003eNeutral required; 120V\u003c\/li\u003e\n\u003cli\u003e5W\/.05A Minimum Load, Suitable For Dc And High Efficiency Exhaust Fans\u003c\/li\u003e\n\u003cli\u003eTap once to start timer or double tap for always on; use raise\/lower buttons to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minutes)\u003c\/li\u003e\n\u003cli\u003eAccessory switch (MA-AS\/MSC-AS) required for 3-way\/multi-location applications; traditional 3-way switches will not work with this device\u003c\/li\u003e\n\u003cli\u003eUse up to 9 accessory switches (MA-AS\/MSC-AS) with one Lutron Maestro 8A Timer Switch\u003c\/li\u003e\n\u003cli\u003eOrange LEDs indicate timer duration or remaining time in minutes; Bottom LED blinks rapidly to indicate one minute of time remaining\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmperage Rating: 5\u003c\/li\u003e\n\u003cli\u003eApplication: Lighting Control\u003c\/li\u003e\n\u003cli\u003eBrand Name: Lutron\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminal\u003c\/li\u003e\n\u003cli\u003eContact Configuration: N-O\u003c\/li\u003e\n\u003cli\u003eContact Rating: 5\u003c\/li\u003e\n\u003cli\u003eInsulation: Plastic\u003c\/li\u003e\n\u003cli\u003eMounting: Wallbox\u003c\/li\u003e\n\u003cli\u003eNumber Of Poles: 1\u003c\/li\u003e\n\u003cli\u003eSize: 4.69 x 2.94\u003c\/li\u003e\n\u003cli\u003eSpecial Features: Rated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eStandard: UL, cUL, IEC, ANSI\/IEEE\u003c\/li\u003e\n\u003cli\u003eSub Brand: Maestro\u003c\/li\u003e\n\u003cli\u003eTiming Range: 5 - 60 min\u003c\/li\u003e\n\u003cli\u003eType: Countdown timer control switch, multi-location\/single-pole\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 120\u003c\/li\u003e\n\u003cli\u003eWattage: 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/368-4493_Page_18.pdf\" target=\"_blank\"\u003eTechnical Document\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/03092903B.pdf\" target=\"_blank\"\u003eInstallation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/3691243_ENG.pdf\" target=\"_blank\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\"\u003eWarranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003cdiv id=\"desc-MA-T51MN-SW\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Lutron Maestro Timer Switch for Fans and Lights is rated to work with up to 150W of LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV, or 3A general purpose fans. The Maestro Timer Switch requires a neutral wire making it suitable for DC and high efficiency exhaust fans. The Maestro Timer Switch is compatible with 3-way\/multi-location switching applications; Lutron Accessory switches are required (MA-AS\/MSC-AS). Use up to 9 Lutron Accessory switches with one Lutron Maestro Timer Switch; existing 3-way switches are not compatible. The Maestro Timer switch completes any project and matches the Maestro aesthetic for areas that don’t require a Maestro dimmer or sensor. Save energy by using the Maestro Countdown Timer in closets, attics, bathrooms, and other low-traffic areas to ensure a light or fan is never left on for a long time. Use the large tap switch to turn the timer on, or double tap for always on; use the raise\/lower buttons on the side to adjust to the desired time-out option ranging from 5-60 minutes. Softly lit orange lights indicate the time remaining before turn-off. Top green LED indicator light labeled ON, has no time limit. The bottom LED blinks rapidly to indicate one minute of time remaining. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFamily\/Collection: Maestro\u003c\/li\u003e\n\u003cli\u003eRated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general-purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eIncludes (1) Maestro Countdown Timer Switch with Neutral; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 150W LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV or 3A general purpose fans\u003c\/li\u003e\n\u003cli\u003eNeutral required; 120V\u003c\/li\u003e\n\u003cli\u003e5W\/.05A Minimum Load, Suitable For Dc And High Efficiency Exhaust Fans\u003c\/li\u003e\n\u003cli\u003eTap once to start timer or double tap for always on; use raise\/lower buttons to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minutes)\u003c\/li\u003e\n\u003cli\u003eAccessory switch (MA-AS\/MSC-AS) required for 3-way\/multi-location applications; traditional 3-way switches will not work with this device\u003c\/li\u003e\n\u003cli\u003eUse up to 9 accessory switches (MA-AS\/MSC-AS) with one Lutron Maestro 8A Timer Switch\u003c\/li\u003e\n\u003cli\u003eOrange LEDs indicate timer duration or remaining time in minutes; Bottom LED blinks rapidly to indicate one minute of time remaining\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmperage Rating: 5\u003c\/li\u003e\n\u003cli\u003eApplication: Lighting Control\u003c\/li\u003e\n\u003cli\u003eBrand Name: Lutron\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminal\u003c\/li\u003e\n\u003cli\u003eContact Configuration: N-O\u003c\/li\u003e\n\u003cli\u003eContact Rating: 5\u003c\/li\u003e\n\u003cli\u003eInsulation: Plastic\u003c\/li\u003e\n\u003cli\u003eMounting: Wallbox\u003c\/li\u003e\n\u003cli\u003eNumber Of Poles: 1\u003c\/li\u003e\n\u003cli\u003eSize: 4.69 x 2.94\u003c\/li\u003e\n\u003cli\u003eSpecial Features: Rated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eStandard: UL, cUL, IEC, ANSI\/IEEE\u003c\/li\u003e\n\u003cli\u003eSub Brand: Maestro\u003c\/li\u003e\n\u003cli\u003eTiming Range: 5 - 60 min\u003c\/li\u003e\n\u003cli\u003eType: Countdown timer control switch, multi-location\/single-pole\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 120\u003c\/li\u003e\n\u003cli\u003eWattage: 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/368-4493_Page_18.pdf\" target=\"_blank\"\u003eTechnical Document\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/03092903B.pdf\" target=\"_blank\"\u003eInstallation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/3691243_ENG.pdf\" target=\"_blank\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\"\u003eWarranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003cdiv id=\"desc-MA-T51MN-TP\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Lutron Maestro Timer Switch for Fans and Lights is rated to work with up to 150W of LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV, or 3A general purpose fans. The Maestro Timer Switch requires a neutral wire making it suitable for DC and high efficiency exhaust fans. The Maestro Timer Switch is compatible with 3-way\/multi-location switching applications; Lutron Accessory switches are required (MA-AS\/MSC-AS). Use up to 9 Lutron Accessory switches with one Lutron Maestro Timer Switch; existing 3-way switches are not compatible. The Maestro Timer switch completes any project and matches the Maestro aesthetic for areas that don’t require a Maestro dimmer or sensor. Save energy by using the Maestro Countdown Timer in closets, attics, bathrooms, and other low-traffic areas to ensure a light or fan is never left on for a long time. Use the large tap switch to turn the timer on, or double tap for always on; use the raise\/lower buttons on the side to adjust to the desired time-out option ranging from 5-60 minutes. Softly lit orange lights indicate the time remaining before turn-off. Top green LED indicator light labeled ON, has no time limit. The bottom LED blinks rapidly to indicate one minute of time remaining. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFamily\/Collection: Maestro\u003c\/li\u003e\n\u003cli\u003eRated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general-purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eIncludes (1) Maestro Countdown Timer Switch with Neutral; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 150W LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV or 3A general purpose fans\u003c\/li\u003e\n\u003cli\u003eNeutral required; 120V\u003c\/li\u003e\n\u003cli\u003e5W\/.05A Minimum Load, Suitable For Dc And High Efficiency Exhaust Fans\u003c\/li\u003e\n\u003cli\u003eTap once to start timer or double tap for always on; use raise\/lower buttons to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minutes)\u003c\/li\u003e\n\u003cli\u003eAccessory switch (MA-AS\/MSC-AS) required for 3-way\/multi-location applications; traditional 3-way switches will not work with this device\u003c\/li\u003e\n\u003cli\u003eUse up to 9 accessory switches (MA-AS\/MSC-AS) with one Lutron Maestro 8A Timer Switch\u003c\/li\u003e\n\u003cli\u003eOrange LEDs indicate timer duration or remaining time in minutes; Bottom LED blinks rapidly to indicate one minute of time remaining\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmperage Rating: 5\u003c\/li\u003e\n\u003cli\u003eApplication: Lighting Control\u003c\/li\u003e\n\u003cli\u003eBrand Name: Lutron\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminal\u003c\/li\u003e\n\u003cli\u003eContact Configuration: N-O\u003c\/li\u003e\n\u003cli\u003eContact Rating: 5\u003c\/li\u003e\n\u003cli\u003eInsulation: Plastic\u003c\/li\u003e\n\u003cli\u003eMounting: Wallbox\u003c\/li\u003e\n\u003cli\u003eNumber Of Poles: 1\u003c\/li\u003e\n\u003cli\u003eSize: 4.69 x 2.94\u003c\/li\u003e\n\u003cli\u003eSpecial Features: Rated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eStandard: UL, cUL, IEC, ANSI\/IEEE\u003c\/li\u003e\n\u003cli\u003eSub Brand: Maestro\u003c\/li\u003e\n\u003cli\u003eTiming Range: 5 - 60 min\u003c\/li\u003e\n\u003cli\u003eType: Countdown timer control switch, multi-location\/single-pole\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 120\u003c\/li\u003e\n\u003cli\u003eWattage: 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/368-4493_Page_18.pdf\" target=\"_blank\"\u003eTechnical Document\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/03092903B.pdf\" target=\"_blank\"\u003eInstallation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/3691243_ENG.pdf\" target=\"_blank\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\"\u003eWarranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003cdiv id=\"desc-MA-T51MN-WH\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Lutron Maestro Timer Switch for Fans and Lights is rated to work with up to 150W of LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV, or 3A general purpose fans. The Maestro Timer Switch requires a neutral wire making it suitable for DC and high efficiency exhaust fans. The Maestro Timer Switch is compatible with 3-way\/multi-location switching applications; Lutron Accessory switches are required (MA-AS\/MSC-AS). Use up to 9 Lutron Accessory switches with one Lutron Maestro Timer Switch; existing 3-way switches are not compatible. The Maestro Timer switch completes any project and matches the Maestro aesthetic for areas that don’t require a Maestro dimmer or sensor. Save energy by using the Maestro Countdown Timer in closets, attics, bathrooms, and other low-traffic areas to ensure a light or fan is never left on for a long time. Use the large tap switch to turn the timer on, or double tap for always on; use the raise\/lower buttons on the side to adjust to the desired time-out option ranging from 5-60 minutes. Softly lit orange lights indicate the time remaining before turn-off. Top green LED indicator light labeled ON, has no time limit. The bottom LED blinks rapidly to indicate one minute of time remaining. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFamily\/Collection: Maestro\u003c\/li\u003e\n\u003cli\u003eRated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general-purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eIncludes (1) Maestro Countdown Timer Switch with Neutral; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 150W LED bulbs, 600W ELV\/Incandescent\/Halogen, 450W MLV or 3A general purpose fans\u003c\/li\u003e\n\u003cli\u003eNeutral required; 120V\u003c\/li\u003e\n\u003cli\u003e5W\/.05A Minimum Load, Suitable For Dc And High Efficiency Exhaust Fans\u003c\/li\u003e\n\u003cli\u003eTap once to start timer or double tap for always on; use raise\/lower buttons to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minutes)\u003c\/li\u003e\n\u003cli\u003eAccessory switch (MA-AS\/MSC-AS) required for 3-way\/multi-location applications; traditional 3-way switches will not work with this device\u003c\/li\u003e\n\u003cli\u003eUse up to 9 accessory switches (MA-AS\/MSC-AS) with one Lutron Maestro 8A Timer Switch\u003c\/li\u003e\n\u003cli\u003eOrange LEDs indicate timer duration or remaining time in minutes; Bottom LED blinks rapidly to indicate one minute of time remaining\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmperage Rating: 5\u003c\/li\u003e\n\u003cli\u003eApplication: Lighting Control\u003c\/li\u003e\n\u003cli\u003eBrand Name: Lutron\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminal\u003c\/li\u003e\n\u003cli\u003eContact Configuration: N-O\u003c\/li\u003e\n\u003cli\u003eContact Rating: 5\u003c\/li\u003e\n\u003cli\u003eInsulation: Plastic\u003c\/li\u003e\n\u003cli\u003eMounting: Wallbox\u003c\/li\u003e\n\u003cli\u003eNumber Of Poles: 1\u003c\/li\u003e\n\u003cli\u003eSize: 4.69 x 2.94\u003c\/li\u003e\n\u003cli\u003eSpecial Features: Rated for 5 A incandescent\/halogen, magnetic low-voltage, electronic low-voltage, LED\/CFL, or fluorescent loads, or 3 A general purpose fans.  Use with exhaust fans to reduce moisture, mold, and mildew in bathrooms. Use with lighting. Tap on to start timer (5-60 minutes); tap off; tap twice for full on with no timer action.  Touch rocker to adjust countdown time. One minute warning before lights\/fan go off. Timer advanced programming features available.\u003c\/li\u003e\n\u003cli\u003eStandard: UL, cUL, IEC, ANSI\/IEEE\u003c\/li\u003e\n\u003cli\u003eSub Brand: Maestro\u003c\/li\u003e\n\u003cli\u003eTiming Range: 5 - 60 min\u003c\/li\u003e\n\u003cli\u003eType: Countdown timer control switch, multi-location\/single-pole\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 120\u003c\/li\u003e\n\u003cli\u003eWattage: 600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/368-4493_Page_18.pdf\" target=\"_blank\"\u003eTechnical Document\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/03092903B.pdf\" target=\"_blank\"\u003eInstallation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/3691243_ENG.pdf\" target=\"_blank\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lutron.com\/TechnicalDocumentLibrary\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\"\u003eWarranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Lutron","offers":[{"title":"Almond","offer_id":47363741778224,"sku":"MA-T51MN-AL","price":35.16,"currency_code":"USD","in_stock":true},{"title":"Biscuit","offer_id":47363741810992,"sku":"MA-T51MN-BI","price":42.2,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":47363741843760,"sku":"MA-T51MN-BL","price":35.16,"currency_code":"USD","in_stock":true},{"title":"Brown","offer_id":47363741876528,"sku":"MA-T51MN-BR","price":35.16,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":47363741909296,"sku":"MA-T51MN-GR","price":35.16,"currency_code":"USD","in_stock":true},{"title":"Hot","offer_id":47363741942064,"sku":"MA-T51MN-HT","price":42.2,"currency_code":"USD","in_stock":true},{"title":"Ivory","offer_id":47363741974832,"sku":"MA-T51MN-IV","price":35.16,"currency_code":"USD","in_stock":true},{"title":"Light Almond","offer_id":47363742007600,"sku":"MA-T51MN-LA","price":35.16,"currency_code":"USD","in_stock":true},{"title":"Midnight","offer_id":47363742040368,"sku":"MA-T51MN-MN","price":42.2,"currency_code":"USD","in_stock":true},{"title":"Palladium","offer_id":47363742073136,"sku":"MA-T51MN-PD","price":42.2,"currency_code":"USD","in_stock":true},{"title":"Snow","offer_id":47363742105904,"sku":"MA-T51MN-SW","price":42.2,"currency_code":"USD","in_stock":true},{"title":"Taupe","offer_id":47363742138672,"sku":"MA-T51MN-TP","price":42.2,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":47363742171440,"sku":"MA-T51MN-WH","price":35.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1910\/4048\/products\/Ecom_MA-T51MN-AL_nowallplate_85b8654a-5ee5-4b93-bdbd-1bcdfa3a883d.jpg?v=1705926394"}],"url":"https:\/\/soliselectricsupply.com\/collections\/timers.oembed","provider":"Solis Electric Supply","version":"1.0","type":"link"}